General points are collected in the guide to VPNs on mobile internet, while here we look at network changes and dropouts.
What happens when switching from Wi-Fi to 4G
When you leave home, the phone switches to the mobile network. The external IP (Internet Protocol) address may change, and the VPN will need to continue exchanging data over the new connection.
| Connection | How it survives a network change | What to bear in mind |
|---|---|---|
| WireGuard | Sends a response to the last address from which a successfully verified encrypted packet arrived | Built-in address roaming helps continue the exchange, but does not guarantee there will be no pause |
| IKEv2 (Internet Key Exchange version 2) | The MOBIKE extension (mobility and multihoming support) updates the addresses of the existing connection | The extension must be supported and enabled on both the client and the server |
| A client without such a mechanism | Usually re-establishes the connection | Automatic recovery depends on the app |
WireGuard's address roaming has nothing to do with paying for international roaming. Test the transition on your own route: connect the VPN at home, switch off Wi-Fi and load a new page. A short pause is possible even with address-change support.
What happens when switching from Wi-Fi to 4G
The external IP (Internet Protocol) address may change, and the VPN will need to continue exchanging data over the new connection.
A short pause is possible even with address-change support.
Why a connection can be more temperamental on a mobile network
A mobile operator's network may use NAT (network address translation), which keeps temporary records of connections. After a period of inactivity, the record for UDP (User Datagram Protocol) may expire. Incoming packets will then stop arriving until the phone sends data again.
RFC 4787, a best-practice document for NAT, requires, with stated exceptions, that a record be kept for at least two minutes. The actual timers of British operators were not measured here. Keepalive packets help preserve the record; in WireGuard, persistent keepalive is off by default.
Do not enable persistent keepalive on a whim: if dropouts occur after idle periods, ask support about it. The impact of background traffic on VPN data usage and battery life is covered separately.
The UK National Cyber Security Centre notes that some networks restrict IPsec (a set of protocols for securing network traffic), while a VPN over TLS (Transport Layer Security) may pass through NAT more reliably. This does not confirm that any particular British operator blocks VPNs.
What to check if the VPN does not work on mobile data
On iPhone, open Settings → Mobile Service and allow mobile data for the VPN app. According to Apple's instructions, with the toggle switched off, the app sends data over Wi-Fi only.
On Android, reaching a data limit turns off mobile data, and data saver mode restricts background transfer. If you have problems, allow the VPN app unrestricted access to data. Section names vary by manufacturer.
| Symptom | What to check on iPhone | What to check on Android | What to do next |
|---|---|---|---|
| Works on Wi-Fi but not on 4G | Whether the app is allowed mobile data | Data limit and background data restrictions | Fix the settings, then try a different connection in the client |
| Drops when leaving home | Whether the client restores the tunnel after losing Wi-Fi | Whether the VPN reconnects, whether background transfer is allowed | Repeat the transition manually and note whether the connect button is needed |
| No internet until the VPN connects | Tunnel state and block settings in the client, if present | Always-on VPN and blocking of connections without a VPN | Restore the tunnel; only disable the blocking deliberately |
| Fails to connect abroad | Data roaming and the selected line | Data roaming, the selected SIM card and the data limit | Check your plan's terms, then enable data roaming |
| Mobile data used while on Wi-Fi | The Connectivity Assist feature | Automatic switching to mobile data, if provided | Turn off Connectivity Assist if it is using mobile data |
On Android, always-on VPN with blocking of connections without it leaves the phone without internet until the tunnel is restored. From Android 8 onwards, a persistent notification appears when such a VPN drops. If you remove the blocking for testing, traffic will be able to flow directly: restore the setting after testing.
When to try a different connection
When one connection works at home but fails to come up or keeps dropping on the mobile network despite correct phone settings, try another one on the same SIM (subscriber identity module) card. The CitadelVPN subscription includes Hysteria2 and several VLESS transports (different ways of carrying the connection), which makes it a suitable choice if you need such options gathered in a single subscription list.
Update the subscription list in a compatible client, choose a different VLESS transport or Hysteria2, and test the mobile network and leaving your home Wi-Fi. The result depends on your network; no connection can be guaranteed by a protocol's name alone. If it does not work, CitadelVPN's support helps with setup.
If the fault remains on only one SIM with correct settings, contact your operator and your VPN provider's support. Report the phone model, operating system version, connection and when the drop occurs: immediately, after an idle period or when changing networks.
Frequently asked questions about a VPN on the move
Can I leave the VPN on while roaming abroad?
Yes, provided mobile internet is available and data roaming is enabled. However, a VPN does not waive roaming charges: before travelling, check the terms of your British plan.
Do I need to turn off automatic 5G selection for the sake of a VPN?
No, switching between 5G and LTE (fourth-generation mobile technology) does not by itself make a VPN incompatible with the network. The iPhone's automatic 5G mode may switch to LTE to save battery; if connection parameters change, the client may need to restore the tunnel.
Does WireGuard guarantee an uninterrupted call when leaving home?
No, address-change support does not guarantee call continuity. Test the transition on your own route: the result also depends on coverage and the client's behaviour.
How to check your VPN is ready for travel
A VPN works over 4G and 5G without Wi-Fi. Allow the app mobile data, check your data limit and the transition from your home network to mobile data. If dropouts occur, check background restrictions and try a different connection; a fault on only one SIM should be reported to the operator and your VPN provider's support.